Antenna terminal and jumper welding device
PRODUCTION EQIPMENTS
Slim, stable peel-resistant antennas
Resistant weld bonds antenna terminal and jumper together in antenna processing for IC tags or cards.
It produces slimmer, stronger and more resistance-stable antennas than caulking does. With this welder, you can reduce your production costs by welding jumpers transferred onto antennas etched on one side, not on both sides.
You can also measure the resonance frequency of antennas (with VRF8200P) and test characteristics of IC tags (in the HF/UHF band) on an optional basis.
| Examples of antenna welding materials | Cu/PET/Cu Al/PET/Al |
|---|---|
| Required welding time | About 1.4 seconds (including the operating time of the upper/lower electrodes) |
| System configuration | Welding heads / Welding power source / Welding transformer / Chiller / Monitor |
| Power | Three-phase AC 200V/30A or two-phase AC 100V/15A |
| Jumper geometry | arbitrary size and location |
| Welding load | controlled by a load cell |
